AFM for Nanomechanical Measurements

Nanoscale mechanical properties are a key consideration in many applications, and the NanomechPro™ Toolkit lets you measure them on everything from cells to ceramics. This collection of techniques by Asylum Research can accurately evaluate a wide range of nanomechanical behavior including elastic and viscous properties, adhesive forces, and hardness. The multiple techniques in the NanomechPro Toolkit offer greater flexibility for different applications and allow deeper insight through comparison of results. With exclusive modes that enable faster measurements of more properties, the NanomechPro Toolkit contains features for both the Cypher™ and MFP-3D™ family AFMs.


  • Force Curves / Force Volume - classic quasistatic method where force versus distance curves are used to provide quantitative sample information such as modulus, hardness and adhesion
  • Fast Force Mapping (FFM) - force versus distance mapping mode that operates up to a pixel rate of 300 Hz and provides modulus, adhesion, plasticity and other calculated properties
  • Dual AC imaging - qualitative bimodal tapping mode provides contrast depending on material stiffness and viscoelasticity
  • Loss Tangent imaging - tapping mode imaging that quantifies phase data in terms of dissipated to stored energy, also known as tand
  • Amplitude Modulation-Frequency Modulation Viscoelastic Mapping (AM-FM) - quantitative bimodal tapping mode measures tip-sample contact stiffness, loss tangent, and calculates elastic modulus (E’) using the Hertz model 
  • Contact Resonance Viscoelastic Mapping (CR-AFM) - contact mode imaging measurement of storage (E’) and loss (E”) moduli
  • Force Modulation Imaging - qualitative contact mode technique that measures sample deformation and provides dissipation

Common Applications

Force Curves / Force Volume
  • Compare elasticity of treated versus untreated biological tissues
  • Provide 2D force volume modulus maps of cells
  • Characterize mechanical properties of hydrogels
  • Quantitative force curve analysis using Hertz, JKR, DMT, Oliver-Pharr models
  • Modulus comparison  of polymeric samples while tracking sample topography 
Dual AC imaging 
  • Provides contrast on tire rubber blends
  • Visualize materials composition and components such as nanocomposites and polymer blends
Loss Tangent imaging
  • Identify barrier layers in commercial packaging materials
  • Show contrast on a range of viscoelastic materials such as polymers, composites and alloys
  • Fast, gentle and high resolution nanomechanical information
  • Viscoelastic properties of materials ranging from cells to polymers to alloys and ceramics
  • Dissipation and elastic modulus of amyloid fibers, dielectrics, and patterned surfaces
  • Identification of polymers (PS, PE, HDPE…) in multilayer “sandwich” materials  
  • Local mechanical characterization of high stiffness materials 
  • Steel blade, carbide and diamond-like material modulus comparisons
  • Provides quantitative modulus of materials such as wood and bones

Exploring Nanoscale Viscoelastic Properties: Recent Advances in Contact Resonance Imaging with AFM

(Published in Imaging and Microscopy)- Development of advanced materials relies on a detailed understanding of nanoscale morphology and mechanical properties. Atomic Force Microscopy (AFM) has become a key tool in material science by providing this information. Contact Resonance imaging has emerged as a powerful AFM technique for its ability to quantitatively characterize the viscoelastic response of materials, its applicability to a wide range of materials, and its ability to provide this information quickly and at high resolution.

Fast, Quantitative AFM Nanomechanical Measurements using AM-FM Viscoelastic Mapping Mode

(Published in Microscopy and Analysis) - Nanoscale mechanical properties impact the behavior and performanceof countless materials and help inform both our theoretical understanding of these materials and their development for commercial applications.


Asylum Research Image Gallery


Related Webinars

	"AFM Imaging and Nanomechanics with blueDrive Photothermal Excitation"

"AFM Imaging and Nanomechanics with blueDrive Photothermal Excitation"

blueDrive Photothermal Excitation- theory, advantages, and real-world examples.

	“Introduction and Innovations in High Speed Quantitative Nanomechanical Imaging”

“Introduction and Innovations in High Speed Quantitative Nanomechanical Imaging”

Capabilities and challenges of AFM techniques for measuring nanomechanical properties.

	"Contact Resonance Tools for AFM Nanomechanics"

"Contact Resonance Tools for AFM Nanomechanics"

Contact Resonance Viscoelastic Mapping Mode technology and applications.

	"Beyond Topography: New Advances in AFM Characterization of Polymers"

"Beyond Topography: New Advances in AFM Characterization of Polymers"

This webinar provides an overview of the AFM’s powerful capabilities for polymers characterization.

Selected Publications

P. Cai, Y. Mizutani, M. Tsuchiya, J. M. Maloney, B. Fabry, K. J. V. Vliet, and T. Okajima, "Quantifying Cell-to-Cell Variation in Power-Law Rheology," Biophys. J. 105, 1093-1102 (2013). doi:10.1016/j.bpj.2013.07.035

K. Gadelrab, and M. Chiesa, "Numerically assisted nanoindentation analysis," Mater. Sci. Eng., A 560, 267-272 (2013). doi:10.1016/j.msea.2012.09.066

A. Gannepalli, D. G. Yablon, A. H. Tsou, and R. Proksch, "Mapping nanoscale elasticity and dissipation using dual frequency contact resonance AFM," Nanotechnology 22, 355705 (2011). doi:10.1088/0957-4484/22/35/355705

R. Garcia, and R. Proksch, "Nanomechanical mapping of soft matter by bimodal force microscopy," Eur. Polym. J. 49, 1897-1906 (2013). doi:10.1016/j.eurpolymj.2013.03.037

E. T. Herruzo, A. P. Perrino, and R. Garcia, "Fast nanomechanical spectroscopy of soft matter," Nat. Commun. 5, 3126 (2014). doi:10.1038/ncomms4126

D. Hurley, M. Kocun, I. Revenko, B. Ohler, and R. Proksch, "Fast, quantitative AFM nanomechanical measurements using AM-FM Viscoelastoc Mapping mode," Microscopy and Analysis 29, 9-13 (2015). link to magazine

M. Kocun, A. Labuda, A. Gannepalli, and R. Proksch, "Photothermally Excited Contact Resonance Imaging in Air and Water," arXiv preprint arXiv:1410.3311 (2014). link to arXiv

G. Lamour, C. K. Yip, H. Li, and J. Gsponer, "High Intrinsic Mechanical Flexibility of Mouse Prion Nanofibrils Revealed by Measurements of Axial and Radial Young's Moduli," ACS Nano 8, 3851-3861 (2014). doi:10.1021/nn5007013

Q. Li, S. Jesse, A. Tselev, L. Collins, P. Yu, I. Kravchenko, S. V. Kalinin, and N. Balke, "Probing Local Bias-Induced Transitions Using Photothermal Excitation Contact Resonance Atomic Force Microscopy and Voltage Spectroscopy," ACS Nano 9, 1848-1857 (2015). doi:10.1021/nn506753u

V. Milkevych, B. Donose, N. Juste-Poinapen, and D. Batstone, "Mechanical and cell-to-cell adhesive properties of aggregated Methanosarcina," Colloids Surf., B 126, 303-312 (2015). doi:10.1016/j.colsurfb.2014.12.035

A. M. A. Moustafa, J. Huang, K. N. McPhedran, H. Zeng, and M. G. El-Din, "Probing the Adsorption of Weak Acids on Graphite Using Amplitude Modulation-Frequency Modulation Atomic Force Microscopy," Langmuir 31, 3069-3075 (2015). doi:10.1021/la5048968

R. Proksch, "Multifrequency, repulsive-mode amplitude-modulated atomic force microscopy," Appl. Phys. Lett. 89, 113121 (2006). doi:10.1063/1.2345593

R. Proksch, and D. G. Yablon, "Loss tangent imaging: Theory and simulations of repulsive-mode tapping atomic force microscopy," Appl. Phys. Lett. 100, 073106 (2012). doi:10.1063/1.3675836

A. Raman, S. Trigueros, A. Cartagena, A. P. Z. Stevenson, M. Susilo, E. Nauman, and S. A. Contera, "Mapping nanomechanical properties of live cells using multi-harmonic atomic force microscopy," Nat. Nanotechnol. 6, 809-814 (2011). doi:10.1038/nnano.2011.186

V. Vadillo-Rodriguez, T. J. Beveridge, and J. R. Dutcher, "Surface Viscoelasticity of Individual Gram-Negative Bacterial Cells Measured Using Atomic Force Microscopy," J. Bacteriol. 190, 4225-4232 (2008). doi:10.1128/jb.00132-08

D. G. Yablon, A. Gannepalli, R. Proksch, J. Killgore, D. C. Hurley, J. Grabowski, and A. H. Tsou, "Quantitative Viscoelastic Mapping of Polyolefin Blends with Contact Resonance Atomic Force Microscopy," Macromolecules 45, 4363-4370 (2012). doi:10.1021/ma2028038

Asylum's AFM Workshop and Open Lab is coming to Purdue Univ. May 8-10. See the first and only full-featured video-r…
12:22 AM - 12 Apr 18
View more of our tweets