Mercury iTC temperature controller
The Mercury iTC temperature controller is ideally suited to monitor and control the OptistatTMDry. It has one PID loop to read the sensor and control the heater mounted on the cryostat. It is very easy to operate from the touch screen user interface. You can connect to the Mercury iTC via multiple interfaces: Ethernet, USB or GPIB (optional).
For further details about the Merucry iTC, click here.
We offer a wide range of window options to suit your experimental needs, covering wavelengths from UV all the way to the extreme IR. The OptistatTMDry only needs one window per access (i.e. a window in the outer vacuum case) minimising absorption losses
For further details about the available window options, click here.
Vacuum pump options
The OptistatTMDry needs to be pumped to a pressure of 10-4 mbar before it is cooled down. It needs to be re-pumped every time the sample is changed. A dry turbo pump is recommended for this, the H4-600 and H4-601 are both ideal for the OptistatTMDry. The H4-601 comes with a vacuum gauge making it easier to know when the cryostat has been pumped down sufficiently to start cooling.
DryLoad vacuum pick up tool
The DryLoad is a vacuum pick up tool designed to make the loading and unloading of the pucks simple.
OptistatTMDry spares kit
The spares kit includes all the tools needed to install and maintain your system including tools for fitting the helium compressor lines; screw drivers for the screws used on the system; replacement o-rings; and screws for the regularly accessed parts.
DRYLXCC cryostat cable
3 metre long cryostat cable for OptistatTMDry, includes one 21 way micro D-type connector for connection to the cryostat and flying lead with 20 wires (10 twisted pairs) for your experimental wiring.
3 metre cryostat cable to connect your Mercury iTC.